Pantry Shelves

We owe you guys a pantry update.  Like a serious pantry update especially since we finished it this weekend (booyah!) AND organized it this weekend (double booyah!).  But last we left off on this little pantry shelf saga we were just getting around to installing those pull out shelves.  For those of you just joining us, you can catch up on pantry building phase 1 here and phase 2 here.  Although the shelves weren’t quite finished, finished here.  They were still missing fronts/drawer pulls, but close enough.  So here’s how we made those little pull out shelves.

Pull Out Kitchen Pantry Shelves

And just for reminder’s sake, here’s what the pantry looked like pre-shelving.  Basically a big ol’ box framed out for the framing lumber drawer slides.

Kitchen Pantry Pre Shelving

Since this post is all about how we made the drawers, here’s drawer making in a nutshell.  We had bought chunky 2″ x 12″ framing lumber for the drawers.  But the wall gap was 13-3/4″.  12″ is pretty much the widest, standard (aka…non special order) framing lumber at most lumber yards.  Ruh-roh.  Since 12″ wide boards are actually 11-1/4″ wide, we just added 1-1/2″ strip of lumber to the larger piece to better fill the wall gap.

Widening Pantry Shelves

We feared pantry items falling off the back of the shelf into the depths of the pantry never to be seen again.  Like the sock behind the dryer situation all over again.  To alleviate this fear and prevent our baking powder from permanent MIA status, we nailed on a 4″ tall piece of pine to serve as a back lip.

Adding Stopper For Back Of Pantry Shelves

And with that, we had a shelf.  Repeat that process four more times and we were left with a total of five drawers for the pantry.  I envisioned the pantry shelves pseudo matching the exposed wood wall and thankfully, the Minwax Early American stain that we already had on hand was a perfect color match.

Pantry Shelves Stained And Polyed

Next step…drawer slides.  I have to admit, we did not…I repeat…DID NOT mess around with the drawer slides.  Just envision that old high school basketball chant running through our heads while picking out the perfect drawer slide.  You know the one…”we don’t mess around…hey…we don’t mess around…hey.”  It’s that cheer that popped up on your Jock Rock CD in your Disc Man circa 1998 while you were jogging around the local track getting your workout on.  Anyway…the drawer slides.  We got the super heavy duty ones.  The ones that could support 75 lbs a pair.  They weren’t cheap by any means, $25 a pair to be exact, but oh so worth it for peace of mind.  Thankfully we had a few Christmas gift cards to Lowes that helped pay the whopping $125 drawer slide bill.  Thanks Mom, Dad, Grandma, & Pat!!!  Here’s what we spent your gifts on:

Heavy Duty Drawer Slides

Installation was much easier than expected.  Especially for me since I did nothing but play Vanna and take screws out of the package and pass them to Colby.  Totally important job.  What would Colby have done without me?!  If you answered “take them out himself” we can longer be internet besties.  To install, we started with the drawers, lining up the drawer slide on the side of the drawer.

Positioning Drawer Slides On Shelves

First drilling a pilot hole where each screw would hold the drawer slide to the drawer:

Drilling Pilot Holes Into Drawer Sides

And then screwing in the screws that came with the drawer slides into the drawer.  Side note…we later had some of the screws pop out because the wood shrunk, putting pressure on the screws.  We have since upgraded the drawer slide screws to 1-1/4″ sheet rock screws which literally holds houses together so these ones are holding much better.

Screwing Together Drawer Slides To Side Of Drawer

The hardest part of drawer installation was installing them inside the pantry nook.  Not only was it super important for proper drawer functioning for the installation to be perfectly level, but we were also operating in a 13″ wide by about 29″ deep space.  Not so easy for maneuverability.  First step, leveling and marking.  We had already installed spacers against the old wood wall where each drawer slide would attach to but needed to mark the pantry side where to install the other drawer slide side.  Using a level, Colby marked each of the five drawer slide locations.

Leveling Shelving

And then painstakingly held the drawer slide in position and level while screwing it into the pantry side.

Screwing Slide Rails Into Pantry Walls

There may have been a few cuss words flying and one swift kick to the pantry due to difficulties in holding/screwing the drawer slide in within such a tight space.  So Colby, the master of jigs, built a little helper to hold the drawer slide while he screwed it into the wall.  It’s just tacked up there temporarily with a pair of nails.  Hash tag third hand.

Slide Rail Holder Jig

After screwing each set of drawer slides into the walls, the pair looked like this:

Slide Rails Installed

And then it was just a matter of sliding each of the drawers into the pantry.  Each worked without a hitch…phew!  But if you did slide a drawer in and it was a bit tight, you could always tighten up your screws or take the drawer slides off and shave down the drawer width.

Pull Out Kitchen Pantry Drawer Installed

And scene…working pantry drawers in the house.

Pull Out Kitchen Pantry Shelves

Goose helped.

Goose Helped

Five drawers in and the pantry is finally starting to look like a pantry.  My itchy trigger finger organizing hand is dying to get in there and load up the shelves with all sorts of kitchen pantry goodness.  I’m envisioning a baking station, flour/sugar storage, and electrics storage.  But alas…there are still more tasks to tackle before we can discuss all things organizing.

Pull Out Kitchen Pantry Shelves

At this point we still need a shelf above the refrigerator for the microwave shelf, install a few more trim pieces, add drawer fronts, and attach some drawer pulls to each shelf.  All in good time, dear readers, all in good time.  In the meantime, we can be found testing out the strength of our drawers (75 lb max) by sitting our 50 lb pooch on the shelves.  Goose does not approve.

Pull Out Kitchen Pantry Shelves

So stay tuned as we try to wrap up our little pantry project, hopefully by the end of the year.  I wish I was kidding.  What we thought would be a quick little weekend project…about six weekends ago…is still in the works.  Sheesh!  Hash tag dragging our feet.  Hash tag dude get on that already.  Hash tag slow and steady.  Hash tag I’m channeling that Subway commercial.  Hash tag can you tell?!

Pssst…while we may have been spending our weekend wrapping up our pantry project, what did you guys tackle?  Any cleaning or organizing projects happening in your neck of the woods?  Lately that’s all I want to do.  Purge, clean, and organize.  Or anyone else taking a painfully long time to finish a project?!  We can’t be the only ones!

Related Posts Plugin for WordPress, Blogger...

2 Comment

  1. Does thinking about cleaning and purging count? And I love the mental image of Goose as pantry test subject.

  2. The look great! And I love how they roll out.

Comments are closed.